Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

IOGEAR 2-Port VGA Video Splitter

Forsiden Kommunikasjon KVM/Dataswitch IOGEAR 2-Port VGA Video Splitter
Produktet er ikke lenger i vårt sortiment. Ta kontakt om du trenger hjelp til å finne et erstatningsprodukt.
IOGEAR 2-Port VGA Video Splitter (GVS62)

IOGEAR 2-Port VGA Video Splitter

Varenr.:
GVS62
EAN:
0881317505576
  • Type KVM-bryter
  • Verter 2
Beskrivelse

2-Port VGA Video Splitter


GVS62

The GVS62 is a 2-port VGA video splitter and a signal booster with IOGEAR's patented VSE (Video Signal Enhancement) Technology. It is the best choice for splitting and carrying a video signal to more that one display with the same quality as the original signal. The GVS62 VGA Video Splitter is used to take video input from a single source and direct it to two video outputs for monitors using analog signals.

The signal boost obtained by using IOGEAR's patented VSE (Video Signal Enhancement) Technology allows you to not only split the signal but it also amplifies the video signal to increase the transmission distance to about 215 feet away. This is no small feat, your average VGA card, over a standard VGA cable, sends a clear VGA signal approximately 25 feet.

Operating with a bandwidth of 250MHz (250 million cycles per second) that is almost 60 times greater than a simple TV signal. The high bandwidth allows for the transmission of large amounts of information at a very high rate of speed, thus allowing for the use of high resolution settings upwards of 1920 x 1440 in 24 or 32 bit true color mode.

Features

  • Stream a single video source to 2 separate VGA monitors
  • Ultra High 250MHz bandwidth superior video quality, maintains highest signal strength in all applications up to 1920 x 1440
  • Includes IOGEAR's patented VSE (Video Signal Enhancement) Technology, which amplifies video signal strength throughout your desire set-up
  • Amplifies video signals increasing transmission distance up to 215 feet
  • Cascadable -Allows you to expand your video splitter set up beyond 2 displays
  • Hassle free, no software to install, instant installation and use
  • Hot-Plug compatible andHot-Swappable
  • Plug-N-Play
  • Compact design for easy placement
  • Supports DDC, DDC2, DDC2B at Port 1

Warranty: 3-YEAR

Specifications

Function GVS62
Video connections
Input 1 x HDB-15 Male
Output 2 x HDB-15 Female
LEDs
Power On 1
VGA Bandwidth (-3db) 250MHz
Video Resolution 1920 x 1440 @ 60 Hz
Signal Type VGA, SVGA, XVGA, USXGA and Multi-sync
Cable Distance 65m (214.5ft)
Cascade 3 Level
Power Consumption 1.24W (Max)
Power
Voltage DC 9V
Amps 300mA
Environment
Operation Temperature 0~50C
Storage Temperature -20~60C
Humidity 0~80% RH; Non-condensing
Housing
Case Plastic
Dimensions GVS62
POP Information
10'' Peg Hook 4
6'' Peg Hook 3
Unit Dimensions
Width 3.25in.
Height 4.25in.
Depth 1.25in.
Unit Package Dimensions
Width 6.25in.
Height 8.75in.
Depth 2.25in.
Master Carton
Width 8.125in.
Height 7in.
Depth 15in.
Master Carton Qty. 6
Weight
Master Carton Wt. 6.24lb
Unit Pack Wt. 0.92lb
Unit Wt. w/accessories 0.64lb
Unit Wt. 0.24lb
Requirements

  • Video source with VGA (HDB-15) connection
  • Displays with VGA (HDB-15) connection

Package Content

  • 1 x 2-Port VGA Video Splitter
  • 1 x Power Adapter
  • 1 x Quick Start Guide
  • 1 x Warranty Card

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.