RAIDON 8.89 Cm (3.5") Carrier Panel
|
|
RAIDON 8.89 Cm (3.5") Carrier Panel
-
Grensesnitt
SATA
-
Installert
0GB
-
Max disker
2
-
RAID
Ja
-
Type
Intern
-
Diskstørrelse
2.5"
LEASING
(ekskl. mva)
Ved Leasing gjelder: Etableringsgebyr 0,-, faktureringsgebyr 0,-/mnd, minimumsordre 0,-. Frakt og mva. kommer i tillegg. Forutsetter kredittgodkjenning. Leasing kan velges som en betalingsmåte når du går til kassen.
|
iR2771-S3(1 floppy bay 2.5” RAID)
Our RAID Enclosures Start Providing S.M.A.R.T Features
iR2771-S3 storage RAID enclosure product now supports the S.M.A.R.T (Self Monitoring, Analysis, and the Reporting Technology) feature. You just have to open this RAIDGuide Manager Utility, you then can enjoy using it to know the HDD quality status, and you could even to replace any HDD which is with critical quality level in advance to help an even better protection for all your data.
Internal RAID Module
RAIDON InTANK iR2771-S3 has a patented design that allows two 2.5” SATA drives to be fitted into one 3.5” drive space! It’s equipped with optional RAID 0 to enhance the speed of transfer compare to a regular hard drive or switch to RAID 1 for an efficient and securer data backup.
The connector location is the same as 3.5”HDD
RAIDON iR2771-S3 internal RAID module supports SATA III 6.0 Gb/s host interface and SATA 22 pin power supply; the connector’s location exactly as the same as a 3.5” hard drive. Thus, it is not necessary to install any other brackets but just install the iR2771-S3 inside to existing operating system and then the system will be upgraded as a RAID storage!
The Performance of RAID 0 mode will faster than one 3.5” HDD
Just set iR2771-S3 to RAID 0 mode and you can get the better and faster data transform ate than one 3.5” hard drive does.
Real-time backup for data security
When using RAID 1 mode (mirroring), the data will write to two hard drive automatically to keep the data safe. If one hard drive failure, just replace a new hard drive (same capacity or bigger) without shutting down the system to keep the system working 24hr. iR2771-S3 will start to rebuild the data from the original hard drive to the new one after the failure hard drive is replaced.
System Upgrade with Ease
Install iR2771-S3 to the floppy or standard 3.5” hard drive slot, your system will become the one with RAID function. If you want to upgrade your system with RAID function but your system don’t have other free space. iR2771-S3 will be the best solution you can find!
Removable Screwless Tray Design
iR2771-S3 comes with two RAIDON’s removable screwless trays. It not only makes user easy to install the hard drives to iR2771-S3, but change the failure hard drive easily.
Makes the system faster and keeps the photo data more safe.
iR2771-S3 can be easily used in a workstation for photographers. Using two solid state drives, iR2771-S3 can provide faster performance than hard drive, it will be faster for photographer to run Photoshop, Lightroom or other photo-editing software. By using RAID 1 (mirroring) mode, the RAW files will have a copy automatically when it be save into iR2771-S3. Photographer will be no longer to worry about the data loss caused by the hard drive failure.
Database Protection for Commercial Accounting System
Install your operating system in one solid-state drive to speed up the system performance and use iR2771-S3’s RAID 1 mode to protect accounting system database. Small and medium business will no longer to worry about the unnecessary data loss of accounting system database which caused by unexpected hard drive failure.
Modularized Component for Faster and Ease of Maintenance
Using iR2771-S3's modular design, the iR2771-S3 is installed in the system of the Laser Cutting System (LCS). The iR2771 can provide a backup system for data or OS. The RAID 1 mode of the iR2771-S3 can be used to tolerate a single hard disk / SSD failure, so that the Laser Cutting System (LCS) to maintain stable work, and no longer to worry about accidental hard drive failure caused the system to shut down.
Fan-less, Cooling Hole Design
For high-speed production line, the most worried about is the system failure. It will shut down the production line and cause the money loss. By using iR2771-S3’s RAID 1 mode, you can keep the production line working 24hr and no worry about the system shut down caused by the unexpected hard drive failure. iR2771-S3 is the most cost-effective solution.
Specifications:
| Model no. |
iR2771-S3 |
| Interface |
SATA III 6.0 Gb/s |
| Support Hard Drive |
2×2.5” SATA III 6.0Gb/s HDD/SSD |
| RAID Level |
RAID 0,1 |
| The Largest Capacity |
2TB |
| Power Supply |
SATA 15pin (12v/5v) |
| LED Indicators |
Yes |
| Operating System |
Windows, Linux |
Function Control
Interface |
GUI (Windows Only) |
| Certification |
CE & FCC |
| Packing Content |
Quick Installation Guide,
Accessory Kit |
| Dimension |
102(W)×26(H)×147(L) mm |
| Operating temperature |
32° to 104° F (0° to 40° C) |
| Storage temperature |
-4° to 116° F (-20° to 47° C) |
| Relative humidity |
5% to 95% noncondensing |
Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et
generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er
forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som
gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er
uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.